MIDI Out is a powerful MIDI output plugin,
supporting 8 pages of 9 freely
assignable controllers each.
Parameters
Channel -
The MIDI output channel number. Generally channel #10 is the drum channel.
Bank -
The patch bank number (MSB & LSB).
Patch -
The patch (instrument) number. This parameter is automated.
The combo box displays the name of the general MIDI instrument for the selected
patch number. It may not match the current instrument if your
device is not using a general MIDI mapping. For some devices, the patch
number also
selects the drumkit for drum channels.
Reset -
Sends a reset (CC #121) message to your MIDI device, then updates
all enabled controls. This switch is handy when you have disabled a control
and you want its assigned controller to be reset by the MIDI device.
Page -
The current controller page (right click to rename).
Each page supports 9 freely assignable controllers (all automatable).
Controller Wheel - Each wheel represents
a single controller. The unassigned wheels in each
page are labeled with three dashes (---). Click the label to enable/disable
the corresponding controller (all controllers are disabled by default). Right
click a control to configure it (controller assignment, range etc.).
Notes & Tips
Though MIDI out was made to replace the (limited) MIDI channels in FL
Studio 2.x, it isn't compatible at all. Older projects won't create MIDI
out channels
automatically.
Pan, filter cutoff & resonance per note (by the graph edit or the
piano roll) is not supported - the MIDI standard only supports velocity per
note.
There's no standard rule for mapping velocity values (0..127) to dB, so
the level scale of MIDI channels might not fit the internal mixer levels.